Archive for December, 2011

US Congress Is Poised to Weaken Light-bulb Efficiency Legislation

The US Congress is close to approval of a massive spending bill that includes a rider eliminating US Department of Energy (DOE) funding that was intended to enforce the 2007 US legislation that has been incorrectly referred to as an “incandescent light-bulb ban.” While there have been reports that the rider will eliminate the legislation, the National Electrical Manufactures Association (NEMA) has taken the position that the legislation will remain in effect and that law-abiding companies will follow the guidelines approved in 2007.

The light-bulb-specific activity comes just weeks before the first stage of the regulations would impact the manufacture of 100W incandescent lamps for sale in the US. The Democratic and Republican parties are using the so-called omnibus spending bill, passage of which is necessary to keep the US government funded and functioning into 2012, to advance partisan initiatives. Many Republicans, especially in the radical Tea Party faction, have previously sought and failed to overturn the light-bulb legislation despite the fact that it was enacted under Republican President George W. Bush.

The Republican-sought riders attacked a number of environmental initiatives, although President Obama and Democratic leaders have worked to limit the environmental impact. The rider eliminating lamp-efficiency regulations remains in the bill at this time. Frances Beinecke, president of the Natural Resources Defense Council, said, “Unfortunately, the bill still contains some damaging riders, including one that will weaken air-pollution controls in the Arctic and another that will block funding to enforce new light-bulb-efficiency standards that were signed into law by George W. Bush.”

The Hill website on its E2 Wire energy- and environment-focused blog reported Thursday night that both the US House of Representatives and Senate tentatively agreed to a $1 trillion spending bill that blocks the Energy Department light-bulb-efficiency standards.

In actuality, according to NEMA, it is only the funding for enforcement that is impacted. “Our view is that the standards are still in effect,” said Joseph Higbee, director of marketing communications at NEMA. “The standards are the law and the manufacturers will follow the law.”

The US House will vote on the bill on Friday, December 16. The US Senate will likely vote on the bill on either Saturday or Sunday. Ironically the more controversial part of the bill is an extension of middle- and lower-class tax benefits, but partisanship politics invariably intertwines unrelated measures that should ideally be handled independently. As mentioned earlier, the Republicans failed this past summer to explicitly repeal the 2007 bill.

The legislation will initially impact lamps with 1700-lm output (typical of 100W-incandescent lamps) beginning in January, requiring 30% more efficiency. Incandescent lamps would not likely meet those guidelines, making LED-based solid-state lighting (SSL) or compact-fluorescent lamps (CFLs) the primary consumer choice on store shelves.

It remains to be seen just what type of impact the rider may have. Even if the rider truly blocked the prior legislation, lighting manufacturers and retailers have been preparing for years for the change. Presumably the supply chain is poised to predominantly sell the more efficient lamps.

Indeed the Republican-led last-grasp effort to diminish the impact of the legislation could cost companies heavily. “Manufacturers have invested millions of dollars in meeting the regulations,” said NEMA’s Higbee.

Higbee correctly points out that the manufacturers have developed hybrid incandescent/halogen lamps that meet the new standards, as well as LED and CFL lamps. That is one reason that Higbee said, “We [NEMA] were opposed to the rider.”

Higbee also believes that any delay in enforcement is bad for the lighting industry. He said, “It brings regulatory uncertainty to the industry.”

LED Night Light Bulbs Meant for A Peaceful Nighttime Sleep

LED light bulbs are uncovering their way into the place to stay as overnight lights for the small ones. There are several types of LED light products available on the market, and a consumer can easily get overpowered. When shopping for LED lights for kids bedroom, know that your child’s wants be prioritized, and excellent sleep is of key worth. A LED light appropriate for your bedroom may possibly be too disruptive for the kids, so pick sensibly.

One legitimate reason to choose on LED lights is that these kinds of bulbs won’t need replacement until your baby is practically a teen. One more advantage of LED light bulbs is its resilience. LEDs do not possess filaments or sensitive elements and so last a very long time in comparison to traditional fluorescent and incandescent lamps. LED bulbs are energy saving, making use of 1/10 of the electrical power used by CFLs (compact fluorescent lights).

Even with research previous to acquiring LED kids lights, perhaps you may still face some difficulties. But don’t fret. Here are several things to be cautious about:

Durability. LED light bulbs are designed to last a long time, and they should. But, you may run into some bulbs that burn out from excess heat. Night lights are low-voltage lights, so overheating should not happen at all. A LED bulb that burns out is most likely caused by a manufacturer’s defect. It’s tempting to grab deals on LEDs popping all over the internet, but make sure to get your LED bulbs only from a reputable dealer.

Extra Features. Don’t make the mistake of buying LED party night lights instead of LED sleep lights for your children’s bedroom. LED party lights often come with additional features and garnishing like laser and sound things that will only distract your child instead of allowing them to sleep. Leaver the color changing lights and strobe features for your teenager’s bedroom. Tip: Some LED night lights double as party lights. If you want to get these, make sure you can switch easily between the regular night light function and the party light function.

Bright Lights. Nighttime lights should of course be dimmer as compared to regular or work lights, but you still run the danger of getting LED bulbs that can be too brilliant for your kid. Your child may possibly be perfectly OK with a quantity of brightness that may really hurt the visual acuity. Know that LEDs give more lighting with lower electrical power. That is, a 12.5 Watt LED bulb is equal to a 60W incandescent bulb. A LED lamp that is 4-7W has a performance much less than the 4-7W efficiency of an incandescent bulb. Take your trusty ancient night light if you buy LEDs in order to test and compare several levels of wattage.

Color. Another problem with shopping from an unreliable provider is the superior feature of phosphor used to make blue LEDs which become white-colored. A night light is sold with a white LED unit. This indicates the LED is blue but the lamp layer is white phosphor. If you recognize that your LED night light transforms into a bluish color, the outside layer used was of substandard.

Use Ancient Lamps. If you happen to be on a budget, you can find a way to turn your present light fixture directly into a night light with no need of buying new LED light bulbs. This handy unit is a night light switch or control, a detector turns the light on quickly at dusk and even off at dawn.

Seoul Semiconductor And Philips Enter into Cross-license Agreement

Seoul Semiconductor has ended its LED patent dispute with Philips by signing a cross-licensing agreement.

Seoul Semiconductor Co., Ltd. (KOSDAQ:046890), the Korea-based LED manufacturer, has announced that is has settled its LED patent dispute with Royal Philips Electronics.

According to Seoul’s press release, the two companies have agreed to settle their pending legal cases and to enter into a cross-license agreement covering patents relating to specific LED technology areas.

Under this arrangement, each party gains access to a substantial part of the other party’s patent portfolios, says Seoul. At the time of writing, Philips and its LED-manufacturing subsidiary Lumileds have not released a statement.

The dispute stems from May 2011, when Philips’ lawsuit against Seoul was quickly followed by news of counter-actions by Seoul against Philips.

“As cross-license agreement details are usually kept confidential, we have agreed not to disclose any of the terms,” said John Bae, vice-president of Seoul Semiconductor. “We will continue to focus our attention towards innovative LED technology and driving adoption through quality and value.” By entering into this cross-license agreement with Philips, Seoul Semiconductor says that it “anticipates expanding its flexibility.”

Separately, Seoul Semiconductor recently introduced Acrich2, the latest versions of its highly successful AC-driven Acriche family. “We are very excited about our Acriche family of products and especially Acrich2, which was introduced in October 2011. Acrich2 eliminates many of the technical barriers associated with traditional high-voltage and AC-driven LED solutions,” said John Bae.

Seoul Semiconductor also holds patent agreements regarding LED technology with many leading LED manufacturers.

GU10 LED Bulbs Helps In Setting Up A Luminous Future And A Well Lighted Society

LEDs are light emitting diodes used in most lighting appliances where a lot of energy savings is enviable. They are moisture resistance and shockproof because of their resin coating. This latest technology does not overheat as well as uses only a small wattage of electricity as compared with other filaments that depends on repeated relay of electrical currents to continue lighting. The latest replacement for these halogen equipments is the GU10 LED bulb. One can substitute this unit for compact fluorescent lamps or minimal energy efficient halogens simply by plugging it to the fixtures.

These new style of lamps are made from mercury- free materials and from impact immune plastic hence will not fall short after few months or crack by accident. GU10 LED bulb is quickly gaining popularity as an alternative to CFL and halogen lamps because it provides a long life of five to ten years of regular use.

These bulbs produce directional light that is concentrated on one area, which is a great choice for a number of lighting applications such as accent lighting, spotlights, recessed lighting, light track, table lamps and decorative lighting. Therefore a person can employ LEDs in locations where bright light is required for instance, inside cupboards and under cabinet units.

Suppliers of GU10 LED offer various colors for these bulbs, consisting of a yellow- toned, and restful white, a chilly white of gentle tones, a soft white and day light unit which releases a bluish white shaded beacon. The yellow tinge of soothing white selection adds to an intimate mood of a dining event for two. The gentle white touch is ideal for the living room whilst the daylight unit might be well suited for an office or workshop.

Brilliant light bulbs function through heating of a metal filament in order to produce light and for those who have ever attempted unscrewing a lit bulb knows the quantity of heat they produce. In fact, the much energy they produce is transformed into heat and not light which is very poor. On the other hand, the GU10 LED generates little or no heat, which makes it very efficient.

However, the only disadvantage to this recent type of lighting device is that they are focused only on one area hence not a very good quality choice for wide area luminosity. They function well as spots or in a display.

With a GU10 LED bulb, a person does not have to worry about the burned out lamps for a long time. The more replacement model one makes the higher electricity consumption saved. As more people switch to this newest technological advancement, the world will bring about a well-illuminated future for earth-friendly environment.